Going to try to post a couple photos. Superstol
On gear with little tires.
Superstol build
-
- Forum Regular
- Posts: 29
- Joined: Fri Mar 15, 2019 8:34 am
Superstol build
You do not have the required permissions to view the files attached to this post.
- BDA
- Veteran Member
- Posts: 707
- Joined: Mon Aug 22, 2016 11:25 am
- Location: Kenai Alaska
Re: Superstol build
Nice looking bird!
what powerplant are you going to use?
What are the inspection holes on bottom of fuselage for?
Battery?
ELT?
What are the red things at the bottom of the door?
Gun mount?
Bottom hinge for door?
what powerplant are you going to use?
What are the inspection holes on bottom of fuselage for?
Battery?
ELT?
What are the red things at the bottom of the door?
Gun mount?
Bottom hinge for door?
SuperStol XL Alaskan With Titan 340
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
-
- Veteran Member
- Posts: 578
- Joined: Sun Mar 22, 2015 7:49 pm
- Location: Garland, Texas
Re: Superstol build
I planning on putting one just behind the Rear Bulkhead in the baggage compartment. Then you can lubricate the Push Pull Belcrank for the elevator, and service the ELT Batteries without climbing into the baggage compartment, to remove the aft bulkhead. I am actually thinking of putting a access door.
AV8R Paul
Certified Light Sport Repairman LSRM-A
Certified Light Sport Repairman LSRM-A
-
- Forum Regular
- Posts: 29
- Joined: Fri Mar 15, 2019 8:34 am
Re: Superstol build
Hi thanks for the compliments!
The inspection holes are for battery and ELT. Have another on the bottom for elt antenna access.
The red things on top and bottom are for my doors. I built two piece doors that fold down and up. Have them on my Kitfox also,like them a lot.
The power plant is a 914. I installed a pass thru on the rear bulk head also apx 10x12” for battery access also.
The inspection holes are for battery and ELT. Have another on the bottom for elt antenna access.
The red things on top and bottom are for my doors. I built two piece doors that fold down and up. Have them on my Kitfox also,like them a lot.
The power plant is a 914. I installed a pass thru on the rear bulk head also apx 10x12” for battery access also.
-
- Forum Regular
- Posts: 29
- Joined: Fri Mar 15, 2019 8:34 am
Re: Superstol build
A few more photos, engine on! Charge air cooler built and mounted. Oil tank complete and mounted.
Oil cooler mount built and mounted.
Oil cooler mount built and mounted.
You do not have the required permissions to view the files attached to this post.
-
- Forum Regular
- Posts: 29
- Joined: Fri Mar 15, 2019 8:34 am
Re: Superstol build
A couple more for fun.
You do not have the required permissions to view the files attached to this post.