AFFORDAPLANE

For general discussion of the Affordaplane aircraft.
Post Reply
dashine
New Member
Posts: 1
Joined: Wed May 25, 2005 8:27 pm
Location: idaho

AFFORDAPLANE

Post by dashine »

Can anyone give me some names of distributors for alluminum, sounds like some of you guys are getting your supplies at pretty reasonable prices. Also, do any of you actually have your a-planes built and flying yet?
john bakewell
New Member
Posts: 1
Joined: Thu Nov 08, 2007 2:20 pm
Location: nottingham uk.

affordaplane weight

Post by john bakewell »

HI,Im  Building I believe the first A-plane in the UK. To meet the deregulated spec. it must be under  115kg.(254pounds) the basic fuselage frame standing on its wheels weighs 114pounds add to this 54poounds for wing tubes and struts  + 88 for Rotax 447 =265pounds
this is without propellor ,instruments,fabric,paint ,controls,cowlings and tank. Does anyone have the same problem?. I would be grateful to see a breakdown of other builders weight schedule. thanks.
Post Reply

Return to “Affordaplane”