The info in AC43.13 is great - thanks. So vakuable that I eventually downloaded all of the chapters while the going was good.
Does anyone know if ANC-18, Design of Wood Aircraft Structures is available in similar format.
My particular interest at this time is the proper design of metal wing attchment fittings (wood spars). The fittings aill be located at half-span in laminated, tapering spar caps - maybe wing joiners is a better description?
I initially I thought that I would cover it with some over-design, but recent information indicates that I need to learn a lot more about hole spacing (and size) in wood. Also that the "yield" in the metal (strap) and the wood should be in sync, so a WAF that varies in modulus over its length.
My drawings will be subjected to professionl scrutiny before I cut any wood, but I would like to get it as close as I can before then.
Take care
WAF's
For the technical discussion of aircraft airframe construction to include tips, techniques, questions, and recommendations.
Post Reply
1 post
• Page 1 of 1
Post Reply
1 post
• Page 1 of 1
Return to “Airframe Construction”
Jump to
- General Aviation Discussion Forums
- ↳ Introductions
- ↳ Hangar Flying
- ↳ Tools
- ↳ Off Topic Discussions
- Homebuilt Experimental Aircraft & E-LSA Forums
- ↳ Aerocomp Aircraft
- ↳ Affordaplane
- ↳ Evans Volksplane
- ↳ Just Aircraft
- ↳ Sheepdog's Highlander Build
- ↳ YOUR LOG HERE
- ↳ Kolb Aircraft
- ↳ Montana Coyote
- ↳ Van's RV Aircraft
- ↳ Wag-Aero Group
- ↳ Wittman Aircraft
- ↳ Mike's Buttercup project
- ↳ Tony's Buttercup Project
- ↳ Eric's Buttercup Project
- ↳ Chadd's Buttercup Project
- ↳ Other Aircraft & New Kit Aircraft Designs
- ↳ Pipistrel
- ↳ Bearhawk
- ↳ Glasair Aircraft
- ↳ Quicksilver Mfg.
- ↳ Kitfox Aircraft
- ↳ KR Aircraft
- ↳ Zenith Aircraft
- ↳ Zodiac
- ↳ CH 701
- ↳ CH 750
- ↳ CH-801
- ↳ Sonex Aircraft
- ↳ Murphy Aircraft
- ↳ Pro-Composites Aircraft
- ↳ Vision Aircraft
- ↳ Personal Cruiser
- ↳ Quad City Aircraft Challenger
- ↳ RANS Aircraft
- ↳ Fisher Aircraft
- ↳ Aeropup Aircraft
- Airframe Technical Discussion Forums
- ↳ Aircraft Design
- ↳ Airframe Construction
- ↳ Firewall Forward
- ↳ Aircraft Finishing
- ↳ Flight Testing
- ↳ Props
- Powerplant Technical Discussion Forums
- ↳ Continental Engine Technical Discussions
- ↳ Corvair Engine Technical Discussions
- ↳ Diesel Engine Technical Discussions
- ↳ Jabiru Engine Technical Discussions
- ↳ Lycoming Engine Technical Discussions
- ↳ Radial Aircraft Engines
- ↳ Rotary Aircraft Engines
- ↳ Rotax Engine Technical Discussions
- ↳ Subaru Engine Technical Discussions
- ↳ Turbine Engine Technical Discussions
- ↳ UL Power Engines
- ↳ V-Twin Motorcycle Engine Technical Discussions
- ↳ VW Engine Technical Discussions
- ↳ Viking Aircraft Engines
- ↳ Yamaha Aircraft Conversions
- Electronics & Avionics Forums
- ↳ Aviation Electronics
- ↳ Avionics, Flight Instruments & EFIS
- ↳ Electrical Wiring