Hey Guys,
I have these Bicycle shop "cable guides" on my Carbs & Choke.....I have now put them
on my Brake cables.....
I made some Streamline Lift Strut Sleeves....and the brake cables coming out of the cage
were in the way.....I already had the Cable Guides because I planned on doing this anyway...
But now I had to .....
It lets the cables follow the landing gear legs, and gets rid of that "BIG HONKIN LOOP"
See Pictures below...
Gotta Fly...
Mike in MN
Kolb brake cable "LOOPS" / "a fix"
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Kolb brake cable "LOOPS" / "a fix"
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Carb cable guides
Here's a few pictures with the same type of Bicycle cable guides...
They REALLY clean up the appearance, and get rid of the "Big Honkin Loops"
They REALLY clean up the appearance, and get rid of the "Big Honkin Loops"
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Aluminum Duct Tape
I changed the way the cables are held in place.....It kind of HIDES them...
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
More Pictures
Here's the rest...
I'll have to wait and see how this will hold up after Taxi & landings....
Someday I'll put streamline sleeves on the gear legs...
I'll have to wait and see how this will hold up after Taxi & landings....
Someday I'll put streamline sleeves on the gear legs...
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- Sean_Caranna
- Founder
- Posts: 231
- Joined: Thu Aug 12, 2004 12:34 am
- Location: Daytona Beach, FL
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Aluminum Duct Tape
Just a Quick update..... The Aluminum Duct Tape "isn't" holding up....
As I land and Taxi , the gear flex's too much and the tape has been getting ugly "krinkles"
in it..... I'll be taking it off....I'll use nylon zip ties to hold it to the gear for now....
I'll have to put some streamline "sleeves" on the landing gear if I want to clean it up...
Gotta Fly...
Mike in MN
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...