Well, I have been too busy to get the new plate done( it is almost done).
So I tried the VHB tape, I used 4 -1” pieces per side because that stuff scares me in large pieces.
The gap seals all stayed in, but I did have one end come loose, so I will add 2 more 1” pieces.
As I said before - with gap seals is mich better.
I had ordered the really expensive one from aircraft spruce for piper AC.
It is made to seal a very small gap so it will not stay in our AC. Although, you might be able to put a gap filler in it. It is a very nice piece.
Gap seal foam maker
- BDA
- Veteran Member
- Posts: 709
- Joined: Mon Aug 22, 2016 11:25 am
- Location: Kenai Alaska
Re: Gap seal foam maker
SuperStol XL Alaskan With Titan 340
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
- BDA
- Veteran Member
- Posts: 709
- Joined: Mon Aug 22, 2016 11:25 am
- Location: Kenai Alaska
Re: Gap seal foam maker
Update
I have finally got a piece that will stay in without glue or tape (so far), I have 2 hours and a bunch of T/O and landings.
I had to use a 2 5/8” foam roll to get a large enough piece that will grip the tube.
The new plate (version 6) has longer “edges” or lips, and a thicker cross section.
More testing and numbers to come.
I have finally got a piece that will stay in without glue or tape (so far), I have 2 hours and a bunch of T/O and landings.
I had to use a 2 5/8” foam roll to get a large enough piece that will grip the tube.
The new plate (version 6) has longer “edges” or lips, and a thicker cross section.
More testing and numbers to come.
SuperStol XL Alaskan With Titan 340
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
- BDA
- Veteran Member
- Posts: 709
- Joined: Mon Aug 22, 2016 11:25 am
- Location: Kenai Alaska
Re: Gap seal foam maker
Update on the gapseals
When I was flying the other day, there was a x-wind and I was practicing slow touchdowns, w high angle of attack and lots of power.
Toward the end I was running out of rudder authority all of the sudden, which I thought was odd. But after I got back to the hanger I noticed that the rudder gap seal had blown out. It really makes a difference!!
My goal here, has been to make an inexpensive gap seal that will stay in place without glue. Up until now the rudder seal has stayed in place, I have had to work on the dimensions for the horizonal seal as it wants to blow out on mine.
I have heard that it stays put on the Highlander and smaller Superstol tho... any other experience there?
When I was flying the other day, there was a x-wind and I was practicing slow touchdowns, w high angle of attack and lots of power.
Toward the end I was running out of rudder authority all of the sudden, which I thought was odd. But after I got back to the hanger I noticed that the rudder gap seal had blown out. It really makes a difference!!
My goal here, has been to make an inexpensive gap seal that will stay in place without glue. Up until now the rudder seal has stayed in place, I have had to work on the dimensions for the horizonal seal as it wants to blow out on mine.
I have heard that it stays put on the Highlander and smaller Superstol tho... any other experience there?
SuperStol XL Alaskan With Titan 340
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
- stpilot09
- Forum Regular
- Posts: 22
- Joined: Thu Aug 27, 2020 8:30 pm
- Location: NorCal