SuperStol Bad Parts ??
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
SuperStol Bad Parts ??
Anyone ever had any bad parts?...Last night I took my Aileron bellcranks out of sealed bag and right away noticed the groove on the side of bolt hole, now tonight while taking pics I found cracks !!...I can feel the biggest crack with my fingernail !
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
They are closed til Monday so I haven’t had a chance to see what factory says.
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
This is the other Aileron Bell Crank, both holes where the AN3-5 go have a vertical groove like a cable could make...both of these came out of a sealed bag !
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
The bag my Bellcranks came in.
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Aileron pulley Notch on perimeter edge
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Same Pulley
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Same Aileron Pulley...came out of a sealed bag.
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
I just figured might as well take pics of the bags
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Aileron Hinge Point Brackets came in this sealed bag...strange grooves on bolt hole edges on 8 of the 12 holes !
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Same Aileron Hinge Point Brackets
You do not have the required permissions to view the files attached to this post.
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Same Aileron Hinge Point Brackets AAW-0143 Pics without flash
You do not have the required permissions to view the files attached to this post.
- danerazz
- Veteran Member
- Posts: 1240
- Joined: Tue Aug 18, 2009 9:33 pm
- Location: Bangor
Re: SuperStol Bad Parts ??
The hole issues look like a laser cutter issue, and some of the marks look like they could be made by a cutter head contacting the part.
EDIT:
The pulley also looks like a CNC cutter starting point gone wrong. The CNC shop looks like they need some adjustment...
EDIT:
The pulley also looks like a CNC cutter starting point gone wrong. The CNC shop looks like they need some adjustment...
Last edited by danerazz on Sat Nov 30, 2019 11:01 pm, edited 1 time in total.
Dane
Paralysis by analysis
#242
Paralysis by analysis
#242
-
- Veteran Member
- Posts: 578
- Joined: Sun Mar 22, 2015 7:49 pm
- Location: Garland, Texas
Re: SuperStol Bad Parts ??
I’d pack up the parts and send them back and ask for a replacement. Make sure you list all of the pieces you are sending back. I’m positive the factory will replace them.
AV8R Paul
Certified Light Sport Repairman LSRM-A
Certified Light Sport Repairman LSRM-A
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Ok thanksdanerazz wrote:The hole issues look like a laser cutter issue, and some of the marks look like they could be made by a cutter head contacting the part.
EDIT:
The pulley also looks like a CNC cutter starting point gone wrong. The CNC shop looks like they need some adjustment...
- CanadianSheepHunter
- Veteran Member
- Posts: 678
- Joined: Thu Feb 26, 2015 1:05 pm
Re: SuperStol Bad Parts ??
Yes for sure I would think there would doubt they will replace, the parts for this kit were built 2013/2014 as far as when he picked it up from factory( I bought a kit that a guy started building on in 2014)AV8R Paul wrote:I’d pack up the parts and send them back and ask for a replacement. Make sure you list all of the pieces you are sending back. I’m positive the factory will replace them.