'
This is a Plans Built Aircraft...
Buy a Blueprint and Find your material anywhere you can.
My building log has a number at the beginning of each "stage"....
I thought it would help to know what Order things were built....
Although , Sometimes I need to jump back to a stage....
The reason...Basically it's about getting the stage close , getting the Bulk of the parts looking like a plane.
...and do the finishing details later during final assembly .
Most Pictures have "Dates"
It helps to find things your looking for when they are sectioned like this.
It's a balance of pictures and babble...
and the beat goes on.
.
This link is to some of the Tools used :
http://www.wingsforum.com/viewforum.php?f=325
.
Gotta Fly...
Mike & "Jaz" the Flying Dogz
.
.
My Buttercup article in EAA Experimenter : (trying to find it again....)
.
.
This is a Buttercup/STOL Building Forum , Plenty of A&P , Engineers, and Builders to answer your questions...
https://groups.io/g/ButtercupSTOL
.
.
A Story about Steve Wittman and the Buttercup are Here :
.
Introduction and file storage for Buttercup
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Introduction and file storage for Buttercup
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Upper Door tube
I put a tube in , it wasn't on the print .
Later I learned that the Tailwind guys do something different with an Aluminum sheet .
Gotta Fly...
Later I learned that the Tailwind guys do something different with an Aluminum sheet .
Gotta Fly...
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Mike's Engine-Turned Floor Pans
Someone made this PDF
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
SLICK Mags
here's a manual
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Articles
here's articles written about the Buttercup
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...