Hi guys,
Have a new IO-550-L in a C210 and its fitted with the JPI engine monitor. We have a big difference between CHTs and EGTs on different cylinders. No 1 should nearly be the hottest but its the coolest by a long way. No 6 should be the coolest but its way hotter than the rest. Theres over 100 deg F between the hottest and the coolest. Heres what we have done so far: Swapped CHT probes , swapped CHT leads, swapped injectors from cyl to cyl, renewed the cylinder assemblies, set up the fuel injection system, flow checked the nozzles, checked the Instrument display with an infra-red thermometer on the cyls. Paid a lot of attention to the baffles, and now...I'm running out of options. Nothing to date has worked. The instrument is accurate. Does anybody have any ideas or may have experienced this before. Thanks in advance. Reg's Geoff
IO-550 problems
For technical discussion of ALL Continental aircraft engines.
Post Reply
1 post
• Page 1 of 1
-
- New Member
- Posts: 2
- Joined: Thu Aug 12, 2010 11:32 pm
Post Reply
1 post
• Page 1 of 1
Return to “Continental Engine Technical Discussions”
Jump to
- General Aviation Discussion Forums
- ↳ Introductions
- ↳ Hangar Flying
- ↳ Tools
- ↳ Off Topic Discussions
- Homebuilt Experimental Aircraft & E-LSA Forums
- ↳ Aerocomp Aircraft
- ↳ Affordaplane
- ↳ Evans Volksplane
- ↳ Just Aircraft
- ↳ Sheepdog's Highlander Build
- ↳ YOUR LOG HERE
- ↳ Kolb Aircraft
- ↳ Montana Coyote
- ↳ Van's RV Aircraft
- ↳ Wag-Aero Group
- ↳ Wittman Aircraft
- ↳ Mike's Buttercup project
- ↳ Tony's Buttercup Project
- ↳ Eric's Buttercup Project
- ↳ Chadd's Buttercup Project
- ↳ Other Aircraft & New Kit Aircraft Designs
- ↳ Pipistrel
- ↳ Bearhawk
- ↳ Glasair Aircraft
- ↳ Quicksilver Mfg.
- ↳ Kitfox Aircraft
- ↳ KR Aircraft
- ↳ Zenith Aircraft
- ↳ Zodiac
- ↳ CH 701
- ↳ CH 750
- ↳ CH-801
- ↳ Sonex Aircraft
- ↳ Murphy Aircraft
- ↳ Pro-Composites Aircraft
- ↳ Vision Aircraft
- ↳ Personal Cruiser
- ↳ Quad City Aircraft Challenger
- ↳ RANS Aircraft
- ↳ Fisher Aircraft
- ↳ Aeropup Aircraft
- Airframe Technical Discussion Forums
- ↳ Aircraft Design
- ↳ Airframe Construction
- ↳ Firewall Forward
- ↳ Aircraft Finishing
- ↳ Flight Testing
- ↳ Props
- Powerplant Technical Discussion Forums
- ↳ Continental Engine Technical Discussions
- ↳ Corvair Engine Technical Discussions
- ↳ Diesel Engine Technical Discussions
- ↳ Jabiru Engine Technical Discussions
- ↳ Lycoming Engine Technical Discussions
- ↳ Radial Aircraft Engines
- ↳ Rotary Aircraft Engines
- ↳ Rotax Engine Technical Discussions
- ↳ Subaru Engine Technical Discussions
- ↳ Turbine Engine Technical Discussions
- ↳ UL Power Engines
- ↳ V-Twin Motorcycle Engine Technical Discussions
- ↳ VW Engine Technical Discussions
- ↳ Viking Aircraft Engines
- ↳ Yamaha Aircraft Conversions
- Electronics & Avionics Forums
- ↳ Aviation Electronics
- ↳ Avionics, Flight Instruments & EFIS
- ↳ Electrical Wiring