Just 103
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Just 103
TKS, I have been very interested in the 103. After OSH 2017 I started calling down to the factory every couple of months, and was told that it had not flown. I then spoke to Gary and indicated to him that I wanted to see it fly and if it did what Troy thought it would do, I'd like to be one of the first customers. Gary told me that the ribs were going to be stamped aluminum. Typical Just spars. spoilers for control. NOW this is just rumor, and I'm not going to reveal my source, but there may be and issue with the spoiler only control. Troy in his video with Dan Johnson states that using spoilers saved 12 to 14 LBS. So if they have to revert to the traditional system that puts the close to the 256# limit. Another way to save a few pounds would be to use Oratex 600 covering.
As far a the engine, the Palini Thor 250 looks to have all of the requirements that Troy will need. Here is a link the Belite's review if the engine:
http://www.beliteaircraft.com/polini-th ... weve-seen/
If anyone else has info, I would as well like to hear it.
Cheers,
Bruce
As far a the engine, the Palini Thor 250 looks to have all of the requirements that Troy will need. Here is a link the Belite's review if the engine:
http://www.beliteaircraft.com/polini-th ... weve-seen/
If anyone else has info, I would as well like to hear it.
Cheers,
Bruce
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Just 103
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
-
- Veteran Member
- Posts: 357
- Joined: Wed Oct 07, 2015 11:40 am
- Location: Cave Creek, AZ
Re: Just 103
A quick update, I was at the factory this past week and they are still working on it. Troy was adding ailerons to the wing. When I left they were recovering the wings. Top side was done, bottom will be done Monday. Then some flight testing. I think he is trying to have it ready and flying for Oshkosh. It's still a work in progress. Looks pretty cool though.
Clark
Clark
Building SuperSTOL Kit 512
Cave Creek, AZ
Cave Creek, AZ
-
- New Member
- Posts: 9
- Joined: Mon Dec 13, 2010 4:52 am
Re: Just 103
Thanks for the update Clark
-
- Veteran Member
- Posts: 578
- Joined: Sun Mar 22, 2015 7:49 pm
- Location: Garland, Texas
Re: Just 103
I was at the factory Friday, and got to watch Troy removing the wings, and then roll the fuselage through the factory, and load the It on the trailer. I should have taken some photos of them doing it to post them. I got some photos of Troys SuperSTOL. Yes Troy did add ailerons to the 103.
AV8R Paul
Certified Light Sport Repairman LSRM-A
Certified Light Sport Repairman LSRM-A
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Just 103
Hey all, if anyone is at Sun n Fun and the 103 is there, get some pix and info and post it. Include price!!!
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
- alan
- Veteran Member
- Posts: 405
- Joined: Fri Feb 04, 2005 1:39 am
- Location: Baytown, TX
Re: Just 103
Let's see if I can post some pics from my phone.
Alan
Alan
You do not have the required permissions to view the files attached to this post.
If I had known I would live this long I would have taken better care of myself.
- alan
- Veteran Member
- Posts: 405
- Joined: Fri Feb 04, 2005 1:39 am
- Location: Baytown, TX
Re: Just 103
Hey, it worked! I asked about price and such but it's not available yet. They have about 2 hours on it so far. It flys good. That's all the info available.
Alan
Alan
If I had known I would live this long I would have taken better care of myself.
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Just 103
Hey Alan, or anyone there, it appears that there are VGs, but no fixed leading edge slots. Is the covering super flight up to silver? I've heard aluminum ribs. Instruments are Belite brand?? Any Other info and more Pix would be greatly appreciated!!!
Thanks Bruce
Thanks Bruce
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
- alan
- Veteran Member
- Posts: 405
- Joined: Fri Feb 04, 2005 1:39 am
- Location: Baytown, TX
Re: Just 103
The covering is Polyfiber (Stits) up through Poly Spray. Can't tell for sure but probably aluminium ribs.
Alan
Alan
If I had known I would live this long I would have taken better care of myself.
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Just 103
It also appears that the fuel tank is in the wing. This is fantastic compared to other 103 aircraft! My guess is to be legal, you won't be able to use full throttle is cruise. (Yeah right).
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
-
- Veteran Member
- Posts: 357
- Joined: Wed Oct 07, 2015 11:40 am
- Location: Cave Creek, AZ
Re: Just 103
Yes, it has aluminum ribs in the wing. I observed this at the factory.BucF16 wrote:Hey Alan, or anyone there, it appears that there are VGs, but no fixed leading edge slots. Is the covering super flight up to silver? I've heard aluminum ribs. Instruments are Belite brand?? Any Other info and more Pix would be greatly appreciated!!!
Thanks Bruce
Clark
Building SuperSTOL Kit 512
Cave Creek, AZ
Cave Creek, AZ
-
- Veteran Member
- Posts: 578
- Joined: Sun Mar 22, 2015 7:49 pm
- Location: Garland, Texas
Re: Just 103
In talking with Troy at the factory, I don’t believe the Tail Boom will be the Aluminum tube. Troy voiced a concer with the cost of the Tube. I wonder if he will offer it as an option.
AV8R Paul
Certified Light Sport Repairman LSRM-A
Certified Light Sport Repairman LSRM-A
-
- Veteran Member
- Posts: 357
- Joined: Wed Oct 07, 2015 11:40 am
- Location: Cave Creek, AZ
Re: Just 103
I'm sure the cost would be crazy, but the boom should be carbon fiber.AV8R Paul wrote:In talking with Troy at the factory, I don’t believe the Tail Boom will be the Aluminum tube. Troy voiced a concer with the cost of the Tube. I wonder if he will offer it as an option.
Clark
Building SuperSTOL Kit 512
Cave Creek, AZ
Cave Creek, AZ