Video of SuperSTOL wing Construction
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Video of SuperSTOL wing Construction
I did a video last night before I covered the second wing. I figured a video might be a good help for others trying to figure things out. I hope it helps.
http://www.youtube.com/watch?v=GgNXtOH1 ... e=youtu.be
http://www.youtube.com/watch?v=GgNXtOH1 ... e=youtu.be
- mac
- Seasoned Member
- Posts: 60
- Joined: Sun Jul 29, 2012 7:57 pm
- Location: Grass Valley, CA.
Re: Video of SuperSTOL wing Construction
Very nicely done Troy!! If pictures are worth a thousand words.................videos are worth ten thousand! You made me realize I need to do a few more things before my wings are ready to cover!
Thanks.
Thanks.
Mark M.
N49SS in Phase 2....for good!
N49SS in Phase 2....for good!
-
- New Member
- Posts: 5
- Joined: Wed Jan 15, 2014 7:49 pm
- Location: Fort St. John BC
Re: Video of SuperSTOL wing Construction
Great video! Worth a thousand pictures
Nathan Hanna
Super STOL 394
Super STOL 394
- SheepdogRD
- Proprietor
- Posts: 936
- Joined: Tue Nov 30, 2010 5:41 pm
- Location: West of Atlanta, GA
Re: Video of SuperSTOL wing Construction
Yep, that helps on my Highlander build, too. Thanks, Troy.
Richard Holtz
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
- john2
- Veteran Member
- Posts: 191
- Joined: Sat Mar 05, 2011 11:42 am
- Location: Lucedale, Ms.
Re: Video of SuperSTOL wing Construction
Troy,
Great video and let me add my thanks as well. I am exactly at the point of trying to figure out some of the stuff you covered in the video.
Great video and let me add my thanks as well. I am exactly at the point of trying to figure out some of the stuff you covered in the video.
Take Care,
John Cooley
Kit #265 converted to SuperSTOL
N265JC reserved
John Cooley
Kit #265 converted to SuperSTOL
N265JC reserved
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: Video of SuperSTOL wing Construction
It seems like it did exactly what I hoped it would. Pictures are great but it is hard to explain stuff. Remember this is what I have done. I never did see any written instructions, so there may be better ways. This is the way that seemed to cover all the safety concerns I had. I will likely do more videos along the way.
Have fun.
Have fun.
- kenryan
- Veteran Member
- Posts: 342
- Joined: Sat Jan 01, 2011 3:46 pm
- Location: anchorage, ak
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: Video of SuperSTOL wing Construction
https://www.youtube.com/watch?v=lVYBjQ0wCe0
Did a part two video of the construction last night. Hope it helps some of you in the build.
Did a part two video of the construction last night. Hope it helps some of you in the build.
- gkremers
- Veteran Member
- Posts: 495
- Joined: Sun Aug 08, 2010 8:06 am
- Location: Michigan
Re: Video of SuperSTOL wing Construction
Troy,
Nice job on the video. Looking forward to the first flight update!
Gary
Nice job on the video. Looking forward to the first flight update!
Gary
-
- New Member
- Posts: 5
- Joined: Wed Jan 15, 2014 7:49 pm
- Location: Fort St. John BC
Re: Video of SuperSTOL wing Construction
Nicely done Troy! Beautifully plane. Thank you for taking the time to post the construction progress. A great resource for many I am sure.
Good luck on first flight.
Good luck on first flight.
Nathan Hanna
Super STOL 394
Super STOL 394
-
- New Member
- Posts: 4
- Joined: Wed Nov 27, 2013 7:47 am
Re: Video of SuperSTOL wing Construction
Nice video, well done. Do me a favor and give some overall measurements as it sits with the wings folded, curious how much area it takes up.
Thanks
Thanks
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: Video of SuperSTOL wing Construction
Wings are open and its almost ready to fly, but it is roughly 8'-9" and 23ft long over all. That's from memory from a while ago though.
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: Video of SuperSTOL wing Construction
https://www.youtube.com/watch?v=Jr_HAxQ ... e=youtu.be
Here is the final product. Final inspection is complete and I just need the paperwork back so I can fly. I hope it comes soon! I had fun doing the videos and I hope it helped many of you.
Happy flight!
Here is the final product. Final inspection is complete and I just need the paperwork back so I can fly. I hope it comes soon! I had fun doing the videos and I hope it helped many of you.
Happy flight!
-
- Seasoned Member
- Posts: 62
- Joined: Tue Sep 17, 2013 6:58 am
Re: Video of SuperSTOL wing Construction
Troy
Thanks! For the great video.
You have done a great job. Let us know how your performance is when you finally get to fly.I am interested in the performance of your cato prop. Not sure what prop I will be using.
I appreciate your attention to details.
Thanks! Oren
Thanks! For the great video.
You have done a great job. Let us know how your performance is when you finally get to fly.I am interested in the performance of your cato prop. Not sure what prop I will be using.
I appreciate your attention to details.
Thanks! Oren