(28) Fabric - Control Surfaces ( Mike )

Re: (28) Fabric - Control Surfaces ( Mike )

Postby planecrazzzy » Sun Nov 26, 2017 3:21 pm

.
I've got three cross coats of Polybrush sprayed on the HS & Elevators.
It seemed to use the Gallon I just bought.
The morning was calm , but only 20F
After I sprayed them... I pulled the table inside the shop to dry

Next , I need to order polyspray , I better buy a gallon.
Wicks sez it's on the way...

Polyspray is two dollars cheaper than polybrush.... Bout $85 bucks.
But after shipping, it's about $103 for one gallon
.
Gotta Fly...
Attachments
Fabric on Elevators (33).JPG
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
 
Posts: 764
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota

Previous

Return to Mike's Buttercup project