Pre- oiling

For technical discussion of ALL Continental aircraft engines.

Pre- oiling

Postby mooney » Sun Feb 04, 2018 4:06 am

I just completed a Top end on my Tsio 520. A friend suggested I should pre oil the engine prior to starting. I lubed everything well during assembly. My friend recommended a pressure vessel with oil plumbed into the engine at the oil cooler. The oil lines are at the bottom of the cooler. My question is into which line do I inject the oil or does it go into the cooler. I seems to me that when I stop pressurizing, the oil will flow back into the container. Is this pre-oiling really necessary?
mooney
New Member
 
Posts: 3
Joined: Sat May 26, 2012 6:56 pm

Return to Continental Engine Technical Discussions