Lycoming 0-320

For technical discussion of ALL Lycoming aircraft engines.

Lycoming 0-320

Postby Ljpgrif » Mon Oct 07, 2019 7:28 am

While balancing my prop, I noticed a small hole from #1 valve cover. Removed the valve cover and found half of shroud tube spring was broke off. Removed all covers and found that 1, 2 and 4 spring was broke off all at the fuel intake side. #3 had a hair line crack.
Looked at the overhaul manual and found that it was installed correctly.
This is a rebuilt engine was a 80 hrs smoh. The springs may not of be new ones causing the problem.

Has anyone heard of any problems like this before?

New Member
Posts: 1
Joined: Mon Oct 07, 2019 6:41 am

Return to Lycoming Engine Technical Discussions