Almost a wing
-
- New Member
- Posts: 13
- Joined: Thu Feb 06, 2014 1:57 pm
Almost a wing
Morning unpacking and inventory
Afternoon I almost have a finished wing...
You do not have the required permissions to view the files attached to this post.
-
- Veteran Member
- Posts: 356
- Joined: Wed Oct 07, 2015 11:40 am
- Location: Cave Creek, AZ
Re: Almost a wing
Looks great, congrats on the kit!
A suggestion, I would ream the cups for the Slat bearings now, before you skin the wings. They are easy to get to now you'll save a TON of aggravation later. I'm working on my Slats now (on pre built wings) and have several of those cups giving me fits because I can't get to them.
Good luck on the build! Be sure to post pics here as you go...
Clark
A suggestion, I would ream the cups for the Slat bearings now, before you skin the wings. They are easy to get to now you'll save a TON of aggravation later. I'm working on my Slats now (on pre built wings) and have several of those cups giving me fits because I can't get to them.
Good luck on the build! Be sure to post pics here as you go...
Clark
Building SuperSTOL Kit 512
Cave Creek, AZ
Cave Creek, AZ
- BDA
- Veteran Member
- Posts: 707
- Joined: Mon Aug 22, 2016 11:25 am
- Location: Kenai Alaska
Re: Almost a wing
Yes
Slat bearing cups need love
I used dremel with sanding drum
Take pictures of important parts so you know what it looks like after fabric
Primer everything
Slat bearing cups need love
I used dremel with sanding drum
Take pictures of important parts so you know what it looks like after fabric
Primer everything
SuperStol XL Alaskan With Titan 340
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
-
- New Member
- Posts: 13
- Joined: Thu Feb 06, 2014 1:57 pm
Re: Almost a wing
Thanks for the tip on reaming the slat cups.