Aileron Building Pics Superstol

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 03, 2019 3:46 pm

Right Aileron hinge riveted/hysoled

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 03, 2019 3:48 pm

Both Ailerons

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 03, 2019 3:49 pm

Both Ailerons

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 03, 2019 3:50 pm

Both Ailerons

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 03, 2019 3:51 pm

Both Ailerons

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sat Nov 09, 2019 4:03 pm

Squaring up the Aileron trailing edge 1/2” aluminum tubing with squares and aluminum angle

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sat Nov 09, 2019 7:39 pm

Left Aileron

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sat Nov 09, 2019 7:45 pm

Left Aileron, tiny bit of skin trimming needed by the topside hinge

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sat Nov 09, 2019 7:47 pm

Left Aileron

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sat Nov 09, 2019 7:49 pm

Left Aileron

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 10, 2019 4:54 pm

50 ml size of Loctite 9460 Hysol Epoxy, and a applicator gun sold separately

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 10, 2019 4:56 pm

The mixing tips for the gun, sold separately...work excellent...comes out end fully mixed 1:1, highly recommended it

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 10, 2019 4:58 pm

The gun also comes with a 2:1 mixer ram rod for other expoxies

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 10, 2019 7:01 pm

Left Aileron, skin riveted on bottom

CanadianSheepHunter · Post by **CanadianSheepHunter** » Sun Nov 10, 2019 7:06 pm

Left Aileron with bottom riveted, top will be left unrivited until pre-cover inspection is done

B_Wings Forum