Ok, so how do you attach the keepers for the seat adjuster pins? Is there supposed to be a hole in the T pin? I don't get it...
Thanks,
Clark
Seat Adjuster Pins?
-
- Veteran Member
- Posts: 356
- Joined: Wed Oct 07, 2015 11:40 am
- Location: Cave Creek, AZ
Seat Adjuster Pins?
You do not have the required permissions to view the files attached to this post.
Building SuperSTOL Kit 512
Cave Creek, AZ
Cave Creek, AZ
- BDA
- Veteran Member
- Posts: 707
- Joined: Mon Aug 22, 2016 11:25 am
- Location: Kenai Alaska
Re: Seat Adjuster Pins?
Yes
drill off center as much as u can
bend pin to fit
drill off center as much as u can
bend pin to fit
SuperStol XL Alaskan With Titan 340
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
N331AK. Shawn Taplin
Wing extensions,Symetrical Airfoil tail ribs (NACA 21)
Mods in progress: Heavier struts, Double slotted flaps
Goal: 15mph no wind
- danerazz
- Veteran Member
- Posts: 1240
- Joined: Tue Aug 18, 2009 9:33 pm
- Location: Bangor
Re: Seat Adjuster Pins?
You drill a hole in the pin near the bottom of the exposed part when it is engaged in your track, then insert a cotter pin so the spring pushes down on it. Off center helps clear the seat frame that it is mounted in.
Dane
Paralysis by analysis
#242
Paralysis by analysis
#242
-
- Veteran Member
- Posts: 356
- Joined: Wed Oct 07, 2015 11:40 am
- Location: Cave Creek, AZ
Re: Seat Adjuster Pins?
Ok, thanks guys. I thought I was losing it. Something so simple. LOL.
Clark
Clark
Building SuperSTOL Kit 512
Cave Creek, AZ
Cave Creek, AZ
- danerazz
- Veteran Member
- Posts: 1240
- Joined: Tue Aug 18, 2009 9:33 pm
- Location: Bangor
Re: Seat Adjuster Pins?
Just be careful to allow some clearance so they dont hang up on the seat structure when you are done.
Dane
Paralysis by analysis
#242
Paralysis by analysis
#242