Individual design and production of wooden propellers

For general discussion of the Van's RV family of aircraft.
Includes: Van's RV-3, RV-4, RV-6, RV-7, RV-8, RV-9, RV-10, and RV-11

Individual design and production of wooden propellers

Postby meglin » Thu Dec 22, 2016 3:30 pm

This propeller went to the United States.
The propeller is covered with fiberglass and clear varnish.
All the holes are formed.
Diameter - 1727 mm.
The propeller is individually designed to provide high performance RV-9 aircraft.
Attachments
Фото0509.jpg
Фото0507.jpg
Фото0505.jpg
Фото0504.jpg
Фото0503.jpg
Фото0495.jpg
Best regards
Vladimir Meglinsky
My site: http://propeller.simplesite.com/
meglin
Seasoned Member
 
Posts: 70
Joined: Sun Aug 16, 2015 9:22 am
Location: Ukraine

Re: Individual design and production of wooden propellers

Postby meglin » Fri Mar 10, 2017 5:34 am

We continue to design and produce propellers for individual orders.
Best regards
Vladimir Meglinsky
My site: http://propeller.simplesite.com/
meglin
Seasoned Member
 
Posts: 70
Joined: Sun Aug 16, 2015 9:22 am
Location: Ukraine

Re: Individual design and production of wooden propellers

Postby meglin » Sat Apr 01, 2017 5:41 am

Propeller for Limbach
Attachments
IMAG0766-.jpg
IMAG0765-.jpg
IMAG0763-.jpg
IMAG0761-.jpg
IMAG0758-.jpg
Best regards
Vladimir Meglinsky
My site: http://propeller.simplesite.com/
meglin
Seasoned Member
 
Posts: 70
Joined: Sun Aug 16, 2015 9:22 am
Location: Ukraine

Re: Individual design and production of wooden propellers

Postby meglin » Wed Feb 07, 2018 4:27 am

"At long last I have flown my new aeroplane with your prop. It was only the first flight yesterday and for just 30 mins. My first impression is that the prop is very good match for both the 0320 and my airframe. The climb rate was up to 1500ft/min and level cruise at 2200/2300 revs nearly 120 Kts after only a very rough short evaluation. I think the 75% cruise will be 130kts so the prop must be very near to the best compromise available.
As you know many Vans 6 owners use the popular 0320 lycoming and the Vans is very similar in general configuration (but not construction) to my airframe so this spec prop should work well. As the Vans is very popular there should be a good market for your product."
Best regards
Vladimir Meglinsky
My site: http://propeller.simplesite.com/
meglin
Seasoned Member
 
Posts: 70
Joined: Sun Aug 16, 2015 9:22 am
Location: Ukraine


Return to Van's RV Aircraft

cron